{"title":"Fuel pumps","description":"","products":[{"product_id":"aem-high-flow-inline-fuel-pump","title":"AEM High Flow Inline Fuel Pump","description":"\u003cdiv class=\"full_description\"\u003eAEM's 400LPH AN Fittings High Flow, High-Pressure Inline Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It can be installed externally or in-tank using optional hardware that is sold separately (see part numbers, below). It utilizes the industry standard \"044 Style\" envelope and -10 AN female inlet and -6 AN female outlet connections for easy installation on new applications and for quick replacement of existing competitor fuel pumps. The 50-1005 fuel pump delivers incredible performance and value.AEM's 400LPH High Flow, High-Pressure Fuel Pump (AEM 50-1005) is capable of supporting over 1,200 HP normally aspirated and a whopping 860 HP at 30 psi boost.* It flows 400LPH (100 gph) at 40 PSI, 340LPH (90 gph) at 73 PSI, and 270LPH (71 gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. fuel pressure charts are available in the Specs section, below.The AEM 400LPH AN Fittings High Flow Fuel Pump is rated for use with ethanol-blended fuels, (E85\/E90) and all types of gasoline, but pump life will be diminished if used with 100% ethanol fuels. The inlet thread is a -10 AN female ORB (O-ring port fitting) and the discharge is a female -6 AN ORB (O-ring port fitting).A male -6 to -8 AN discharge fitting with integral high-pressure check valve, terminal nuts, terminal boots and installation instructions are included. Optional accessories that are sold separately include a -10 ORB fitting inlet pre-filter (for use with in-tank installations), and both -8 and -6 discharge adapters without integral check valves. Accessory fittings are hard anodized.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003ePopular \"044 Style\" physical configuration, but with AN inlet \u0026amp; discharge port connections\u003c\/li\u003e\n\u003cli\u003eMaintains very high flow even at boosted fuel pressures; 340LPH @ 73 PSI (30 psi boost)\u003c\/li\u003e\n\u003cli\u003eInstalls externally or in-tank\u003c\/li\u003e\n\u003cli\u003eEach pump individually tested to flow minimum of 400LPH (100gph) @ 40 PSI\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump, -6 to -8 male AN discharge fitting with check valve, terminal nuts \u0026amp; boots, instructions\u003c\/li\u003e\n\u003cli\u003eOptional -10 ORB fitting pre-filter, -6 and -8 discharge adapters without the integral check valves\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":44206413283427,"sku":"50-1005","price":193.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/3978\/0195\/files\/aem14.avif?v=1779590806"},{"product_id":"aem-400lph-metric-inline-high-flow-fuel-pump","title":"AEM 400LPH (Metric) Inline High Flow Fuel Pump","description":"\u003cdiv class=\"full_description\"\u003eThe 400lph Metric High-Flow Inline Fuel Pump has an M18X1.5 female inlet and M12x1.5 male outlet. It utilizes the industry standard \"044 Style\" envelope. It is capable of supporting over 1,200 HP normally aspirated and a whopping 860 HP at 30 psi boost!* It flows 400lph (105 gph) at 40 PSI, 340 lph (90 gph) at 73 PSI, and 270 lph (71 gph) at 120 PSI. AEM's 400LPH High Flow, High-Pressure Fuel Pump (AEM 50-1005) is capable of supporting over 1,200 HP normally aspirated and a whopping 860 HP at 30 psi boost!* It flows 400LPH (100 gph) at 40 PSI, 340LPH (90 gph) at 73 PSI, and 270LPH (71 gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. fuel pressure charts are available in the Specs tab. The AEM 400LPH AN Fittings High Flow Fuel Pump is rated for use with ethanol-blended fuels, (E85\/E90) and all types of gasoline, but pump life will be diminished if used with 100% ethanol fuels.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003ePopular \"044 Style\" physical configuration but with AN inlet \u0026amp; discharge port connections\u003c\/li\u003e\n\u003cli\u003eMaintains very high flow even at boosted fuel pressures; 340LPH @ 73 PSI (30 psi boost)\u003c\/li\u003e\n\u003cli\u003eInstalls externally or in-tank\u003c\/li\u003e\n\u003cli\u003eEach pump individually tested to flow minimum of 400LPH (100gph) @ 40 PSI\u003c\/li\u003e\n\u003cli\u003eCompatible with Flex Fuel (E85\/E90) and all types of gasoline (100% Alcohol fuels may diminish fuel pump life)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":44206413414499,"sku":"50-1009","price":193.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/3978\/0195\/files\/aem15.avif?v=1779590898"},{"product_id":"aem-high-flow-in-tank-fuel-pump","title":"AEM High Flow In-Tank Fuel Pump","description":"\u003cdiv class=\"full_description\"\u003eAEM's 340LPH High Flow In-Tank Fuel Pump is designed for high performance, naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and a high volume of fuel flow for a very competitive price.The AEM 340LPH High Flow In-Tank Fuel Pump (PN 50-1000) flows 340 lph (84 gph) at 40 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Please see the flow curves and current draw vs. fuel pressure graphs on the specs tab for more information.This fuel pump is designed for in-tank mounting for use with gasoline and features a compact 39mm diameter that fits most applications. It has an offset inlet design that eases installations and includes a wiring harness, pre filter, end cap and rubber buffer sleeve. Every pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.AEM fuel pumps include a universal pre filter which may not fit certain vehicle applications. Please refer to the OEM recommendations for filter replacement for your vehicle.Your vehicle's factory fuel pump wiring may not be adequate enough to handle the current draw of AEM's High Flow Fuel Pumps. Please refer to the Electrical Requirements section in the instructions document for proper wiring.TECHNICAL SPECS:Weight: 12.5oz (354grams)Outside Diameter: 39mm ODExternal Materials: Black plated steel with laser etchingInlet Fitting: 7.7mm ID, 11.0mm OD. Offset InlineOutlet Fitting: 8 mm hose clamp. OffsetPRV Activation: 80 PSIImpeller Design: Single Scroll Ceramic TurbineVOLTAGE SPECS:Connector Terminal: 6 mm Spade (pos\/neg)Min Voltage Input: 6 voltsMax Voltage Input: 18 voltsCurrent Draw (40 psi): 12 amps (13.5v)Current Draw (80 psi): 15 amps (13.5v)Fuse: 20 amps (13.5v)* Power rating given at 43 PSI, 13.5v at the pump terminal with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eIn-tank design\u003c\/li\u003e\n\u003cli\u003eTested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003e39mm diameter fits most applications\u003c\/li\u003e\n\u003cli\u003eOffset inlet design eases installation\u003c\/li\u003e\n\u003cli\u003eEach pump individually tested\u003c\/li\u003e\n\u003cli\u003eFor gasoline vehicles\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump, rubber sleeve and end caps, pre filter and flying lead\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":44206456995939,"sku":"50-1000","price":113.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/3978\/0195\/files\/aem16.avif?v=1779591083"},{"product_id":"aem-high-flow-in-tank-fuel-pump-1","title":"AEM High Flow In-Tank Fuel Pump","description":"\u003cdiv class=\"full_description\"\u003eAEM's 400LPH high flow fuel pumps were designed with high performance naturally aspirated and forced induction EFI vehicles in mind! They deliver the same high flow and reliable performance that AEM has become known for at very competitive price. Each pump is individually flow tested and guaranteed to flow 400+ LPH (106 GPH) at 40 PSI (13.5V), which on gasoline will support 1000+ horsepower!* The pumps also maintain their high flowrate even as system pressure increases flowing 330+ LPH at 70 PSI (13.5V) which will support approx. 870 HP* on gasoline! Please see the flow curves and current draw vs. fuel pressure graphs on the specs tab for more information. With their compact 39mm body (same size as Walbro 255), low amperage draw, 11mm inlets and 9mm barbed outlet's these fuel pumps were designed to replace the OEM fuel pump in many applications. The 50-1230 features a double barbed outlet that is ideal for 3\/8-inch ID hose where the 50-1235 features a smooth barbed outlet that is compatible with 5\/16-inch ID hose. Each pump includes a wiring harness, pre filter, end cap and rubber buffer sleeve.Note: Your vehicle's factory fuel pump wiring may not be adequate to handle the current draw of AEM's High Flow Fuel Pumps. Please refer to the Electrical Requirements section in the instructions document for proper wiring.Note: These pumps do not include integrated check valves.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eHighest flow 39mm body fuel pump on the market. Each pump individually flowed and guaranteed to deliver 400+ LPH (40 PSI, 13.5V)\u003c\/li\u003e\n\u003cli\u003eMaintains very high flow even at boosted fuel pressures; 330+ LPH (70 PSI, 13.5V) (30 psi boost)\u003c\/li\u003e\n\u003cli\u003e100% Compatible with most fuels including: pump\/race gasoline, ethanol (up to E100), methanol (up to M100)\u003c\/li\u003e\n\u003cli\u003eHighly efficient - pumps draw only 12A @ 40 PSI and 15A @ 70 PSI\u003c\/li\u003e\n\u003cli\u003eBoth models feature a 9mm outlet barb with an 11mm inlet in-line with the outlet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":44206482587747,"sku":"50-1235","price":166.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/3978\/0195\/files\/aem17.avif?v=1779591195"},{"product_id":"aem-high-flow-in-tank-fuel-pump-2","title":"AEM High Flow In-Tank Fuel Pump","description":"\u003cdiv class=\"full_description\"\u003eAEM's 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.The AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.The 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter, end cap and rubber buffer sleeve. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.TECHNICAL SPECS:Weight: 12.5oz (354grams)Outside Diameter: 39mm ODExternal Materials: Black plated steel with laser etchingInlet Fitting: 7.7mm ID, 11.0mm OD. Offset InlineOutlet Fitting: 8 mm hose clamp. OffsetPRV Activation: 80 PSIImpeller Design: Single Scroll Ceramic TurbineVOLTAGE SPECS:Connector Terminal: 6 mm Spade (pos\/neg)Min Voltage Input: 6 voltsMax Voltage Input: 18 voltsCurrent Draw (40 psi): 12 amps (13.5v)Current Draw (80 psi): 15 amps (13.5v)Fuse: 20 amps (13.5v)* Power rating given at 43 PSI, 13.5v at the pump terminal with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eTested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003e39mm diameter fits most applications\u003c\/li\u003e\n\u003cli\u003eOffset inlet design eases installation\u003c\/li\u003e\n\u003cli\u003eEach pump individually tested\u003c\/li\u003e\n\u003cli\u003eFor gasoline vehicles\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump, rubber sleeve and end caps, pre filter and flying lead\u003c\/li\u003e\n\u003cli\u003eIn tank design\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":44206523711587,"sku":"50-1200","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/3978\/0195\/files\/aem1_d063fe30-c129-42e6-b355-be44c1400f41.avif?v=1779591397"},{"product_id":"aem-high-flow-in-tank-fuel-pump-3","title":"AEM High Flow In-Tank Fuel Pump","description":"\u003cdiv class=\"full_description\"\u003eAEM's 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.The AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.The 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter, end cap and rubber buffer sleeve. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.TECHNICAL SPECS:Weight: 12.5oz (354grams)Outside Diameter: 39mm ODExternal Materials: Black plated steel with laser etchingInlet Fitting: 7.7mm ID, 11.0mm OD. Offset InlineOutlet Fitting: 8 mm hose clamp. OffsetPRV Activation: 80 PSIImpeller Design: Single Scroll Ceramic TurbineVOLTAGE SPECS:Connector Terminal: 6 mm Spade (pos\/neg)Min Voltage Input: 6 voltsMax Voltage Input: 18 voltsCurrent Draw (40 psi): 12 amps (13.5v)Current Draw (80 psi): 15 amps (13.5v)Fuse: 20 amps (13.5v)* Power rating given at 43 PSI, 13.5v at the pump terminal with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eTested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003e39mm diameter fits most applications\u003c\/li\u003e\n\u003cli\u003eOffset inlet design eases installation\u003c\/li\u003e\n\u003cli\u003eEach pump individually tested\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump, rubber sleeve and end caps, pre filter and flying lead\u003c\/li\u003e\n\u003cli\u003eIn tank design\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":44206541635683,"sku":"50-1220","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/3978\/0195\/files\/aem2_e49415d4-6e41-462d-9416-01ca394c758a.avif?v=1779591499"},{"product_id":"aem-400lph-e85-compatible-hi-flow-in-tank-fuel-pump-double-barb","title":"AEM 400LPH E85-COMPATIBLE HI FLOW IN-TANK FUEL PUMP - DOUBLE BARB","description":"\u003cdiv class=\"full_description\"\u003eAEM's 400LPH high flow fuel pumps were designed with high performance naturally aspirated and forced induction EFI vehicles in mind! They deliver the same high flow and reliable performance that AEM has become known for at very competitive price. Each pump is individually flow tested and guaranteed to flow 400+ LPH (106 GPH) at 40 PSI (13.5V), which on gasoline will support 1000+ horsepower!* The pumps also maintain their high flowrate even as system pressure increases flowing 330+ LPH at 70 PSI (13.5V) which will support approx. 870 HP* on gasoline! Please see the flow curves and current draw vs. fuel pressure graphs on the specs tab for more information. With their compact 39mm body (same size as Walbro 255), low amperage draw, 11mm inlets and 9mm barbed outlet's these fuel pumps were designed to replace the OEM fuel pump in many applications. The 50-1230 features a double barbed outlet that is ideal for 3\/8-inch ID hose where the 50-1235 features a smooth barbed outlet that is compatible with 5\/16-inch ID hose. Each pump includes a wiring harness, pre filter, end cap and rubber buffer sleeve. Note: Your vehicle's factory fuel pump wiring may not be adequate to handle the current draw of AEM's High Flow Fuel Pumps. Please refer to the Electrical Requirements section in the instructions document for proper wiring. Note: These pumps do not include integrated check valves.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eHighest flow 39mm body fuel pump on the market. Each pump individually flowed and guaranteed to deliver 400+ LPH (40 PSI, 13.5V)\u003c\/li\u003e\n\u003cli\u003eMaintains very high flow even at boosted fuel pressures; 330+ LPH (70 PSI, 13.5V) (30 psi boost)\u003c\/li\u003e\n\u003cli\u003e100% Compatible with most fuels including: pump\/race gasoline, ethanol (up to E100), methanol (up to M100)\u003c\/li\u003e\n\u003cli\u003eHighly efficient - pumps draw only 12A @ 40 PSI and 15A @ 70 PSI\u003c\/li\u003e\n\u003cli\u003eBoth models feature a 9mm outlet barb with an 11mm inlet in-line with the outlet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":44206580858979,"sku":"50-1230","price":166.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/3978\/0195\/files\/aem3_48582674-4def-4a99-9edb-925645eba303.avif?v=1779591597"},{"product_id":"aem-340lph-e85-compatible-high-flow-in-tank-fuel-pump","title":"AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump","description":"\u003cdiv class=\"full_description\"\u003eAEM's 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. The AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation. The 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter, end cap and rubber buffer sleeve. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale. TECHNICAL SPECS: Weight: 12.5oz (354grams) Outside Diameter: 39mm OD External Materials: Black plated steel with laser etching Inlet Fitting: 7.7mm ID, 11.0mm OD. Offset Inline Outlet Fitting: 8 mm hose clamp. Offset PRV Activation: 80 PSI Impeller Design: Single Scroll Ceramic Turbine VOLTAGE SPECS: Connector Terminal: 6 mm Spade (pos\/neg) Min Voltage Input: 6 volts Max Voltage Input: 18 volts Current Draw (40 psi): 12 amps (13.5v) Current Draw (80 psi): 15 amps (13.5v) Fuse: 20 amps (13.5v) * Power rating given at 43 PSI, 13.5v at the pump terminal with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eTested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003e39mm diameter fits most applications\u003c\/li\u003e\n\u003cli\u003eOffset inlet design eases installation\u003c\/li\u003e\n\u003cli\u003eEach pump individually tested\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump, rubber sleeve and end caps, pre filter and flying lead\u003c\/li\u003e\n\u003cli\u003eIn tank design\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":44206616215651,"sku":"50-1215","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/3978\/0195\/files\/aem4_8892a6d7-dbce-4c8e-a19e-805099cb399e.avif?v=1779591688"}],"url":"https:\/\/heltonchassisandfab.com\/collections\/fuel-pumps.oembed","provider":"HELTON CHASSIS AND FAB","version":"1.0","type":"link"}